Decreases temperatures, increases drainage system life.

Why Choose Eagle Handsinks?  Here's the Eagle Advantage

There are two very good reasons to install an Eagle Cool Trough™ water tempering system. First off, you’ll be up to code, because Section 701.7 of the International Plumbing Code mandates that water entering a drainage system cannot exceed 140°F. So, there’s that. Secondly, since water over 140°F can damage your PVC pipes and cause other safety and/or environmental issues, cooling your drain water means your drainage system will last longer.

 

 

Cool Trough™ Water Tempering System

Consultant designed, patented system

If your company uses a boiler, humidifier, sterilizer, or any commercial equipment that produces drain water over 140°F, the Cool Trough™ is a must. Because The Cool Trough activates the temperature sensor at 130°F, cooling the water before it enters your drain lines. Plus, In addition, it turns off the mixing valve at 120°F, thus using water only when required. Here’s another big plus: operation of the Cool Trough™ requires no additional steps for the operator. Also, because Since the valve is mechanically actuated, there is no need for an electrical connection, which means there is no chance of an electrical component failure. You simply hook a cold water line to the shutoff valve provided, and protection for your drain lines is ensured.

 

CoolTrough

There are two very good reasons to install an Eagle Cool Trough™ water tempering system. First off, you’ll be up to code, because Section 701.7 of the International Plumbing Code mandates that water entering a drainage system cannot exceed 140°F. So, there’s that. Secondly, since water over 140°F can damage your PVC pipes and cause other safety and/or environmental issues, cooling your drain water means your drainage system will last longer.If your company uses a boiler, humidifier, sterilizer, or any commercial equipment that produces drain water over 140°F, the Cool Trough™ is a must. Because The Cool Trough activates the temperature sensor at 130°F, cooling the water before it enters your drain lines. Plus, In addition, it turns off the mixing valve at 120°F, thus using water only when required. Here’s another big plus: operation of the Cool Trough™ requires no additional steps for the operator. Also, because Since the valve is mechanically actuated, there is no need for an electrical connection, which means there is no chance of an electrical component failure. You simply hook a cold water line to the shutoff valve provided, and protection for your drain lines is ensured.

Design & Construction Features

  • Integral mechanical temperature sensor maintains water temperature at 140°F or less
  • Built-in pitch toward a 4˝ drain ensuring total drainage
  • Subway-style lift-out grating available in anti-slip gray fiberglass or stainless steel
  • 4˝ (76mm) diameter drain with removable basket-style strainer
  • No electrical connection required
  • Shutoff valve accepts 1˝ water line
  • Back flow preventer
  • Stainless steel anchor clip
  • 14-gauge stainless steel access compartment
  • Troughs available in widths ranging from 12˝ to 24˝ (305 to 610mm)
  • 18˝ to 120˝ (457 to 3048mm) lengths available
  • Anti-splash troughs available

For use in:

  • Food Production
  • Processing
  • Manufacturing Facilities
  • Commercial Kitchens
  • Any facility draining water over 140°F!